License plate screws are the smallest, most easily lost fastener in automotive service work. A vehicle comes in for a full detail, the plate has to come off for access to the rear bumper cover, and when it comes time to reinstall, one screw is on the floor somewhere. Or a used car lot is prepping inventory and realizes half the vehicles are missing plate screws. Or a fleet is being detailed and the service tech puts the plate back with one screw because the second one rolled into the shop drain. A 100-pack on the shelf solves all of these problems at once.
The Slotted Hex Screws — 100-Pack from Polishing Systems Inc is the bulk supply format for this high-consumption, low-cost shop supply item. Standard thread, slotted hex head for driver or wrench installation, 100 screws per pack — enough to cover dozens of plate installations before restocking.
What This Product Is
A 100-pack of standard slotted hex-head license plate mounting screws. These are the standard size screws used on the vast majority of US passenger vehicles, light trucks, and commercial vehicles for front and rear plate mounting to standard frame brackets. Slotted hex head allows installation with either a flathead screwdriver or a small wrench, making them practical for hand tools and power tool use.
Key Features and Why They Matter
- 100-pack quantity — bulk supply eliminates constant small restocking. Enough screws to cover 50 full-plate installations (front + rear) without reordering.
- Slotted hex head — compatible with both flathead screwdrivers and small wrenches. Practical for installation in tight frame bracket areas where a Phillips head or star drive might not be practical.
- Standard thread size — matches the plate frame thread specification used on the vast majority of domestic and imported passenger vehicles.
- Inexpensive bulk pricing — the per-screw cost is negligible, which is the right cost level for a supply item consumed in single-use quantity per plate installation.
What These Screws Are NOT For
These are plate-frame-to-vehicle-body mounting screws sized for standard license plate brackets. They are not wheel lug nuts, trim screws, or general fasteners — using them in applications they are not designed for is not recommended. For specialty plate frames with non-standard thread requirements, confirm thread size before ordering.
Who Uses This
Car dealerships that install and reinstall license plates on incoming and outgoing inventory. Detail shops that remove plates during full exterior details and need to reinstall them cleanly. Fleet operators who process vehicle acquisitions and disposals and need to mount plates consistently. Service departments that remove plates during rear bumper or body work. Auto transport companies that handle plate management across delivered vehicles. Anyone who installs plates regularly and does not want to run out of screws at the wrong moment.
How to Use
- Thread by hand first: Always start the screw by hand to avoid cross-threading the plate bracket insert. Cross-threaded inserts in plastic bumper covers are a costly repair.
- Install with appropriate tool: Use a flathead screwdriver or small hex wrench to tighten snugly. Do not overtighten — plate bracket inserts strip easily under excessive torque.
- Check both plates: Verify front and rear plates are secured with both screws per plate before completing the vehicle handoff.
Why Buy a 100-Pack vs. Small Packs or Individual Sets
The per-screw cost on a 100-pack is a fraction of buying individual replacement sets from an auto parts store. For any shop or operation that removes and reinstalls plates regularly, the 100-pack is the correct supply format — inexpensive enough to not track individual screw consumption, large enough to last weeks to months depending on volume. See the full license plate hardware category at Polishing Systems Inc for complementary plate frames, caps, and related hardware.
Frequently Asked Questions
What thread size are these screws?
These are standard license plate screws sized for the vast majority of US passenger vehicles and light trucks. Contact Polishing Systems Inc to confirm the specific thread specification if you are purchasing for a vehicle with non-standard plate bracket hardware.
Are these screws rust-resistant?
These are standard utility license plate screws. For vehicles in high-corrosion environments (coastal areas, heavy road salt use), stainless steel plate screws provide better long-term corrosion resistance. These standard screws are adequate for normal service cycles where the plate is removed and reinstalled periodically.
Can these be used with plastic license plate frames?
Yes — standard plastic license plate frames use the same thread specification as these screws. Thread by hand first and tighten snugly without overtightening to avoid cracking plastic frame hardware.
How many screws do I need per vehicle?
Standard US plate mounting is 2 screws per plate. For a vehicle with both front and rear plates, that is 4 screws total. A 100-pack covers 25 full vehicle plate installations before restocking.
Do you carry license plate frames and caps as well?
Yes — see the license plate hardware category at Polishing Systems Inc for the full lineup of plate screws, frames, and accessories.
