The 6 inch orbital bonnet is the detail-work tool in the orbital bonnet system. Where the 11 inch is efficient on broad panels and the 9 inch is versatile across vehicle sizes, the 6 inch is precise — right for hood pin areas, door edges, bumper cap sections, and small vehicle models where larger bonnets make accurate product application difficult without overlapping onto trim or rubber edges that should not be product-coated.
The Microfiber Orbital Bonnet 6 inch — Green is the smallest in the PSI orbital bonnet lineup, designed for 6 inch orbital polisher heads and precision finishing work on compact vehicle panels, detailed section work, and areas where larger bonnets cannot reach without unwanted product contact on adjacent surfaces. The green color coding identifies this size within a complete three-size system. Same microfiber construction as the 9 inch and 11 inch versions, in a precision-work diameter.
What This Bonnet Is
A 6 inch microfiber orbital polishing bonnet for compact orbital polisher heads. The smallest standard size in the orbital bonnet system — appropriate for detail work, small vehicle sections, and areas where the larger bonnets produce overhang or edge contact that compromises application accuracy. Same slip-on design and microfiber construction as the larger sizes in the same system.
Key Features and Why They Matter
- 6 inch compact diameter — precision working area for small panels and detail sections. Means accurate product application in areas where larger bonnets cannot be controlled without overhang onto adjacent surfaces.
- Microfiber construction — consistent product application and clean residue removal. Same performance characteristics as the larger sizes in the system, in a compact diameter.
- Green color coding — immediately distinguishes this size from the 9 inch blue and 11 inch yellow bonnets. Means correct size selection during production without measuring.
- Slip-on installation — installs in seconds on a 6 inch orbital polisher head. Means fast changeovers when moving between vehicle areas requiring different bonnet sizes.
- Machine washable and reusable — same long service life as the larger sizes when properly maintained.
What This Bonnet Is NOT For
Not for broad panel polishing where the 9 inch or 11 inch would be more efficient. Not for compound or correction work — this is a finishing and application bonnet. Do not use on surfaces that have not been washed and dried first. For the mid-size version, see the 9 inch Blue Orbital Bonnet. For full-size, see the 11 inch Yellow Orbital Bonnet.
Who Uses This
Detail shops and car wash operations using a complete multi-size orbital bonnet system, mobile detailers doing spot finishing work, and operators working on compact vehicles and motorcycles where the smaller bonnet provides more controlled application. The 6 inch is the tool that completes the bonnet system — having all three sizes available gives a complete range for any orbital polisher-based finishing workflow.
How to Use
- Install: Slip the bonnet over the 6 inch orbital polisher head.
- Apply product: Minimal product is needed for a 6 inch application area — apply conservatively to avoid waste.
- Work small sections: The 6 inch is most effective working focused areas — bumper caps, mirror housings, small panel sections.
- Launder after use.
Frequently Asked Questions
Is this suitable for motorcycle tanks and fairings?
Yes — the 6 inch bonnet is well suited to the smaller, more curved surfaces of motorcycle tanks and fairings where larger orbital bonnets either do not fit or cannot be controlled accurately.
What polisher uses a 6 inch bonnet head?
Some orbital polishers come with 6 inch foam bonnet heads as an accessory. Verify your polisher’s bonnet head diameter before ordering. The 6 inch is less common than the 9 inch and 11 inch in production car wash environments and is more typical in dedicated detail shop applications.
Should I stock all three sizes?
For a complete orbital bonnet system, yes — the 6 inch, 9 inch, and 11 inch sizes cover the full range of vehicle types and panel areas you are likely to encounter. The 11 inch for standard production work, the 9 inch for mid-size vehicles and tighter areas, and the 6 inch for precision detail work and compact vehicle applications.
How many 6 inch bonnets should I stock?
Two to three is a practical starting point — one in use, one clean and ready, and one in laundry rotation. For high-volume operations using the 6 inch bonnet for spot finishing on every vehicle, a larger working stock reduces downtime from waiting for laundered bonnets.
Does this bonnet work with compound?
No — microfiber orbital bonnets in this system are for light polish, wax, and sealant application. For compound work, a dedicated cutting bonnet or foam cutting pad is required.
