In a production detailing environment, towel management is a real operational cost. Washing, sorting, and tracking a fleet of cloth microfiber towels — especially once compound and polish residue has built up across hundreds of uses — takes time and labor that adds up across a full week. The tradeoff between cloth microfiber quality and paper towel convenience is something every high-volume detailer has thought about. Rolla Fiber is the answer to that tradeoff.
The Magna Shine Rolla Fiber 50-Count Microfiber Towel Roll delivers microfiber performance — genuine split-fiber toweling that picks up polish residue, wipes surfaces clean without streaking, and handles product buff-off — in a roll format that behaves like a paper towel in terms of workflow. Tear off a fresh 12×12 towel, use it, and discard or launder. No sorting, no dedicated microfiber laundry cycle, no tracking which towels are clean and which are contaminated.
What This Product Is
This is a roll of 50 perforated microfiber towels, each measuring 12×12 inches, supplied on a single roll by Magna Shine. The towels are genuine split-fiber microfiber — not a nonwoven composite or a paper-microfiber blend. The roll format and perforated separation makes them dispense like paper towels from a mounted dispenser or on a flat surface.
Key Features and Why They Matter
- 50 microfiber towels per roll — high count for a single purchase. So what? You are stocked for a full week of production detailing without towel restocking mid-week.
- 12×12 inch size — large enough for panel wipe-down, product buff-off, and final inspection wipe. Not too large for single-hand operation on interior work.
- Perforated roll format — tear-off single towels on demand. Fits standard paper towel dispensers or a horizontal roll holder at the work station.
- Genuine split-fiber microfiber — actual microfiber performance for polish and compound buff-off, glass cleaning, and interior surface wiping. Not a substitute material.
- Single-use or limited-use workflow — use a fresh towel for each surface or each product step. Eliminates cross-contamination between compound, polish, and sealant towels.
What This Is NOT For
These are not engineered for heavy-paint-correction compound work where a thick plush microfiber pad is needed to absorb large amounts of abrasive product. They are also not an alternative to a quality drying towel for post-wash drying on larger vehicle surfaces. For production buffing work requiring a heavy towel, use a dedicated thick microfiber buffing cloth. These towels are best suited for final wipe-down, product application, glass cleaning, and interior detailing where a fresh surface per wipe is the operational priority.
Who Uses This
High-volume detail shops doing same-day full details where towel laundry management is a bottleneck, ceramic coating installers who need guaranteed-clean wipe surfaces for each coating step, mobile detailers who cannot run laundry on the road, and car wash finishing stations that need a consistent clean towel for every vehicle exit are the primary buyers. The 50-count roll is also practical for shops using a combination of roll-format and cloth format towels for different job steps.
How to Use
- Mount on a dispenser or place roll at workstation for easy one-hand access during detailing.
- Tear off a single 12×12 towel per wipe step — use a fresh towel for each new product or each new panel section.
- Use for product buff-off, glass wipe, or interior surface wipe as you would a standard microfiber towel.
- Discard used towels or collect in a laundry bag for washing if preferred. The towels are washable if you choose to reuse them.
- Store roll in a dry location away from contamination. Protect from workshop dust and chemical overspray.
Why Buy Roll-Format vs. Bulk Folded Microfiber
Bulk folded microfiber towels are the right format for heavy-use cloth applications where laundry management is efficient. Roll-format microfiber is the right format when you need a guaranteed-clean surface every time, when laundry is a bottleneck, or when contamination control is critical — like coating application steps or finishing inspections. Many professional shops use both: cloth microfiber for buffing and drying, roll microfiber for final inspection wipes and delicate surfaces. See our full towel and drying category for companion products including the 16×25 microfiber 16-pack.
Frequently Asked Questions
Are these towels truly machine washable?
Yes — despite the roll format, these are genuine microfiber towels that can be washed in a standard washing machine. Wash with a microfiber-safe detergent (no fabric softener) on warm and tumble dry low. Many operations choose to use them as semi-disposable but washing and reusing is practical.
What GSM are these towels?
The Magna Shine Rolla Fiber towels are a production-weight microfiber — lighter than heavy plush drying towels, optimized for the wipe-down and buff-off applications the roll format is used for. They are not a high-GSM drying towel, but they deliver genuine microfiber surface cleaning performance.
Can these be used for ceramic coating final wipes?
For the coating leveling and buff-off step after coating application, fresh microfiber towels from a sealed package are strongly recommended — and the roll format excels here because each towel comes off the roll clean and uncontaminated. Ensure the towels are tested with your specific coating product before production coating work.
Does the roll fit standard paper towel dispensers?
Yes — the roll dimensions are designed to fit most standard wall-mount or countertop paper towel dispensers, making workstation integration easy. Exact fit depends on your specific dispenser model.
Are there other Magna Shine towel formats available?
Yes — check the full drying and towel category for additional Magna Shine products and standard microfiber towel packs.
